Results

• Explain basic electricity relationships in series and parallel circuits.
• Use an ammeter and voltmeter to take readings in circuits.
• Provide reasoning to explain the measurements and relationships in circuits.
• Build circuits from schematic drawings.
• Determine if common objects are conductors or insulators.
• Compare and contrast AC and DC circuits.
• Describe how capacitors and inductors behave in a circuit.
• Experimentally determine the RC time constant.
• Construct RLC circuits and determine the conditions for resonance.

When electromagnetic radiation is absorbed by a material the energy it carries has to go somewhere. When lower energy waves, like radio and infrared waves, are absorbed there can be an increase in temperature of the absorbing material. Higher energy waves, like x-ray and gamma waves, can actually permanently damage or change materials. Learn about the different types of electromagnetic waves and how their energies can influence their effects on objects.

This podcast (audio) file explains how electric current can be obtained from the sun through the solar panel using direct illumination of the sun rays

• Predict how current will change when resistance of the circuit is fixed and voltage is varied.
• Predict how current will change when voltage of the circuit is fixed and resistance is varied.

Electrical devices convert the electrical energy carried by the charges into other types of energy such as heat, sound, and motion. Components in the appliance resist the flow of charge and are referred to as resistors. In this unit1 you will understand what resistance is, the factors that affect the resistance and the relationship between resistance and current.

Most of us use electricity every day in many different ways so it is important that we understand the dangers, or hazards, associated with electricity and we know how to use it safely.

When a circuit is connected and complete, charge can move through the circuit. Charge will not move unless there is a reason, a force to drive it around the circuit. Think of it as though charge is at rest and some- thing has to push it along. This means that work needs to be done to make charge move. A force acts on the charges, doing work, to make them move. The force is provided by the battery in the circuit.

An explanation of wave interference and solution of a few examples to find the value of the total wave when two wave pulses overlap

The wavelength and frequency of a wave are related to one another by the speed of travel of the wave, which depends on the type of wave and the medium through which it is passing.

• Make waves with water, sound, and light and see how they are related.
• Discuss wave properties using common vocabulary.
• Explain how changing the frequency and amplitude affects the characteristics of the wave.
• Design an experiment to measure the speed of the wave.